Buying

InkShield kits are available in my store.

If you want to buy parts separately on your own the following resources will be helpful:

Components

  • Components list at Mouser (all but the power connector and SIL headers): Mouser Project Page
  • SIL headers (either one, NOT both)
  • JST PH power connector from Digikey (Can also use any normal 0.1″ connector) 455-1719-ND
  • For the first two prototype revisions this inductor was used: B78108S1184J

Ink Carrier

Details about the carriage and the rubber wiper can be found here

Ink

Details about the ink heads can be found here:

  • Ink is available from the sites listed above that sell carriers
  • It is also possible to find them on eBay (often expired, however I have had no problems with any expired ink)